SMC EZ Switch Specifications Page 1

LEDs Definition The switch contains one power LED for the device, Link/Act LED for each port that shows the activities and information of the ports.

Station Connection Connect each station to the switch by twisted-pair cable. Plug one RJ-45 connector into a RJ-45 port of the switch, and plug the ot

Product Specifications Standard IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3ab 1000BASE-T IEEE802.3x full duplex flow control Pre-IEEE 802.3az

Copyright Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for

LIMITED WARRANTY Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to be free from defects in workmanship and materials, u

WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER.S SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT OF THE PRODUCT IN Q

Compliances Federal Communication Commission Interference Statement Note: This equipment has been tested and found to comply with the limits for a Cla

• Electrostatic Discharge according to EN 61000-4-2: 2001 ED.1.2 (Contact Discharge: ±4 kV, Air Discharge: ±8 kV) • Radio-frequency electromagnetic

FCC Certifications This Equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to p

Introduction SMCGS501/SMCGS801 is a powerful, high-performance Gigabit Ethernet switch, with 5/8 ports capable of 10/100/1000 Mbps auto-negotiation o

Key Features  Complies with 10BASE-T specifications of the IEEE802.3 standard  Complies with 100BASE-TX specifications of the IEEE802.3u standar